Skip to content Skip to footer

CẦN SIẾT LỰC 1/4 INCH 12NM A1 WERA 05075800001 | 05075800001

15,449,000

Categories: , Brand: Product ID: 54384

Description

Version:The special slipping trigger mechanism reliably prevents unintentional overtightening.
Desired torque value is easily set and saved as the user can hear and feel the device engage upon reaching the scale value.
The 72 fine-pitched teeth enable a low return angle of only 5°.
With 1/4 inch square drive.Advantage:Torque lock function:The torque function can be switched off – the tool can therefore also be used as a standard ratchet with high release torques and for applications involving defined rotational angles.Function:On reaching the set torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again.
The overslip trigger mechanism ensures that the set torque values are not exceeded.Standard:Tested to DIN EN ISO 6789.Cutting data:Legend for drawing and formula:l1 = Lever length without plug-in headl2 = Adjusted reference dimension on the torque wrenchl3 = Lever length including factory calibration reference dimensionl4 = Reference dimension of the plug-in headL = Total length of the toolT1 = Torque to be setT2 = Specified torque

Reviews

There are no reviews yet.

Be the first to review “CẦN SIẾT LỰC 1/4 INCH 12NM A1 WERA 05075800001 | 05075800001”

Your email address will not be published. Required fields are marked *

QUALITY TOOLS FOR EVERY CRAFT

Address
□ Mã số thuế: 0313616319, cấp bởi Sở kế hoạch và đầu tư thành phố Hồ Chí Minh ngày 13/1/2016
□ Chịu trách nhiệm quản lý nội dung: Nguyễn Phạm Nguyệt Minh

□ Miền Nam: 226 Trương Vĩnh Ký, Phường Tân Sơn Nhì, Quận Tân Phú
□ Miền Trung: 120 Điện Biên Phủ, Nam Phước, Duy Xuyên, Quảng Nam
□ Miền Bắc: Ngõ 78 Duy Tân, Dịch Vọng Hậu, Cầu Giấy, Hà Nội (Tầng 9)
□ Hải Phòng:  Số 3/36 đường Dân Lập, Phường Dư Hàng Kênh, Quận Lê Chân,TP. Hải Phòng

Newsletter

PHÚ THÁI Engineering Technology © 2024. All Rights Reserved.